dmesg - Intel Xeon D-1531

Return To Intel Xeon D-1531 System Information

Linux version 5.10.0-20-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.158-2 (2022-12-13)
Command line: BOOT_IMAGE=/vmlinuz-5.10.0-20-amd64 root=/dev/mapper/103--vg-root ro quiet
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007986efff] usable
BIOS-e820: [mem 0x000000007986f000-0x0000000079a3cfff] reserved
BIOS-e820: [mem 0x0000000079a3d000-0x0000000079b37fff] usable
BIOS-e820: [mem 0x0000000079b38000-0x0000000079fdffff] ACPI NVS
BIOS-e820: [mem 0x0000000079fe0000-0x000000007bdc7fff] reserved
BIOS-e820: [mem 0x000000007bdc8000-0x000000007bdc8fff] usable
BIOS-e820: [mem 0x000000007bdc9000-0x000000007be4efff] reserved
BIOS-e820: [mem 0x000000007be4f000-0x000000007bffffff] usable
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: Supermicro SYS-5038MD-H24TRF/X10SDE-DF, BIOS 1.3 02/13/2018
tsc: Fast TSC calibration using PIT
tsc: Detected 2199.775 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x480000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000080000000 mask 3FFF80000000 uncachable
  1 base 380000000000 mask 3FC000000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
last_pfn = 0x7c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8d0-0x000fd8df]
Using GB pages for direct mapping
RAMDISK: [mem 0x342fb000-0x36174fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM)
ACPI: XSDT 0x0000000079B840A0 0000BC (v01 SUPERM SMCI--MB 01072009 AMI  00010013)
ACPI: FACP 0x0000000079B9B200 00010C (v05 SUPERM SMCI--MB 01072009 AMI  00010013)
ACPI: DSDT 0x0000000079B841F0 017010 (v02 SUPERM SMCI--MB 01072009 INTL 20091013)
ACPI: FACS 0x0000000079FDEF80 000040
ACPI: APIC 0x0000000079B9B310 0000F4 (v03 SUPERM SMCI--MB 01072009 AMI  00010013)
ACPI: FPDT 0x0000000079B9B408 000044 (v01 SUPERM SMCI--MB 01072009 AMI  00010013)
ACPI: FIDT 0x0000000079B9B450 00009C (v01 SUPERM SMCI--MB 01072009 AMI  00010013)
ACPI: SPMI 0x0000000079B9B4F0 000041 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000)
ACPI: MCFG 0x0000000079B9B538 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: UEFI 0x0000000079B9B578 000042 (v01                 00000000      00000000)
ACPI: DBG2 0x0000000079B9B5C0 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013)
ACPI: HPET 0x0000000079B9B638 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: WDDT 0x0000000079B9B670 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
ACPI: SSDT 0x0000000079B9B6B0 00EE27 (v01 AMI    PmMgt    00000001 INTL 20120913)
ACPI: SSDT 0x0000000079BAA4D8 0020C5 (v02 SUPERM SpsNm    00000002 INTL 20120913)
ACPI: SSDT 0x0000000079BAC5A0 000064 (v02 SUPERM SpsNvs   00000002 INTL 20120913)
ACPI: PRAD 0x0000000079BAC608 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
ACPI: DMAR 0x0000000079BAC710 0000AC (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: HEST 0x0000000079BAC7C0 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: BERT 0x0000000079BAC868 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: ERST 0x0000000079BAC898 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: EINJ 0x0000000079BACAC8 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: Reserving FACP table memory at [mem 0x79b9b200-0x79b9b30b]
ACPI: Reserving DSDT table memory at [mem 0x79b841f0-0x79b9b1ff]
ACPI: Reserving FACS table memory at [mem 0x79fdef80-0x79fdefbf]
ACPI: Reserving APIC table memory at [mem 0x79b9b310-0x79b9b403]
ACPI: Reserving FPDT table memory at [mem 0x79b9b408-0x79b9b44b]
ACPI: Reserving FIDT table memory at [mem 0x79b9b450-0x79b9b4eb]
ACPI: Reserving SPMI table memory at [mem 0x79b9b4f0-0x79b9b530]
ACPI: Reserving MCFG table memory at [mem 0x79b9b538-0x79b9b573]
ACPI: Reserving UEFI table memory at [mem 0x79b9b578-0x79b9b5b9]
ACPI: Reserving DBG2 table memory at [mem 0x79b9b5c0-0x79b9b631]
ACPI: Reserving HPET table memory at [mem 0x79b9b638-0x79b9b66f]
ACPI: Reserving WDDT table memory at [mem 0x79b9b670-0x79b9b6af]
ACPI: Reserving SSDT table memory at [mem 0x79b9b6b0-0x79baa4d6]
ACPI: Reserving SSDT table memory at [mem 0x79baa4d8-0x79bac59c]
ACPI: Reserving SSDT table memory at [mem 0x79bac5a0-0x79bac603]
ACPI: Reserving PRAD table memory at [mem 0x79bac608-0x79bac709]
ACPI: Reserving DMAR table memory at [mem 0x79bac710-0x79bac7bb]
ACPI: Reserving HEST table memory at [mem 0x79bac7c0-0x79bac867]
ACPI: Reserving BERT table memory at [mem 0x79bac868-0x79bac897]
ACPI: Reserving ERST table memory at [mem 0x79bac898-0x79bacac7]
ACPI: Reserving EINJ table memory at [mem 0x79bacac8-0x79bacbf7]
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000047fffffff]
NODE_DATA(0) allocated [mem 0x47ffd6000-0x47fffffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000047fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000099fff]
  node   0: [mem 0x0000000000100000-0x000000007986efff]
  node   0: [mem 0x0000000079a3d000-0x0000000079b37fff]
  node   0: [mem 0x000000007bdc8000-0x000000007bdc8fff]
  node   0: [mem 0x000000007be4f000-0x000000007bffffff]
  node   0: [mem 0x0000000100000000-0x000000047fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000047fffffff]
On node 0 totalpages: 4168373
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3993 pages, LIFO batch:0
  DMA32 zone: 7725 pages used for memmap
  DMA32 zone: 494364 pages, LIFO batch:63
  Normal zone: 57344 pages used for memmap
  Normal zone: 3670016 pages, LIFO batch:63
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 102 pages in unavailable ranges
On node 0, zone DMA32: 462 pages in unavailable ranges
On node 0, zone DMA32: 8848 pages in unavailable ranges
On node 0, zone DMA32: 134 pages in unavailable ranges
On node 0, zone Normal: 16384 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x7986f000-0x79a3cfff]
PM: hibernation: Registered nosave memory: [mem 0x79b38000-0x79fdffff]
PM: hibernation: Registered nosave memory: [mem 0x79fe0000-0x7bdc7fff]
PM: hibernation: Registered nosave memory: [mem 0x7bdc9000-0x7be4efff]
PM: hibernation: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- 
Built 1 zonelists, mobility grouping on.  Total pages: 4103219
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.0-20-amd64 root=/dev/mapper/103--vg-root ro quiet
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 2027412K/16673492K available (12295K kernel code, 2536K rwdata, 7556K rodata, 2664K init, 5468K bss, 424124K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 36508 entries in 143 pages
ftrace: allocated 143 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 524544, nr_irqs: 520, preallocated irqs: 16
random: crng init done
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200925
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x0000007bb3a000 end: 0x0000007bb48fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 8 under DRHD base  0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb55e683a0, max_idle_ns: 440795268820 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.55 BogoMIPS (lpj=8799100)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Vulnerable
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
TAA: Vulnerable: Clear CPU buffers attempted, no microcode
MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 32K
smpboot: CPU0: Intel(R) Xeon(R) CPU D-1531 @ 2.20GHz (family: 0x6, model: 0x56, stepping: 0x3)
Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3  #4  #5  #6
MDS CPU bug present and SMT on, data leak possible. See  for more details.
TAA CPU bug present and SMT on, data leak possible. See  for more details.
MMIO Stale Data CPU bug present and SMT on, data leak possible. See  for more details.
  #7  #8  #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 12 processors activated (52794.60 BogoMIPS)
node 0 deferred pages initialised in 32ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x79b38000-0x79fdffff] (4882432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1674834147.084:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Kprobes globally optimized
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A03:03: _OSC: platform does not support [SHPCHotplug LTR]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb307000-0xfb30700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfb306000-0xfb30600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb304000-0xfb3043ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Enabling MPC IRBNCE
pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: Enabling MPC IRBNCE
pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb303000-0xfb3033ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb302000-0xfb3027ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb301000-0xfb3010ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfb300000-0xfb300fff 64bit]
pci 0000:01:00.0: [8086:6f50] type 00 class 0x088000
pci 0000:01:00.0: reg 0x10: [mem 0xfb206000-0xfb207fff 64bit]
pci 0000:01:00.1: [8086:6f51] type 00 class 0x088000
pci 0000:01:00.1: reg 0x10: [mem 0xfb204000-0xfb205fff 64bit]
pci 0000:01:00.2: [8086:6f52] type 00 class 0x088000
pci 0000:01:00.2: reg 0x10: [mem 0xfb202000-0xfb203fff 64bit]
pci 0000:01:00.3: [8086:6f53] type 00 class 0x088000
pci 0000:01:00.3: reg 0x10: [mem 0xfb200000-0xfb201fff 64bit]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:02.2: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [8086:1521] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfb120000-0xfb13ffff]
pci 0000:04:00.0: reg 0x18: [io  0xe020-0xe03f]
pci 0000:04:00.0: reg 0x1c: [mem 0xfb144000-0xfb147fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:04:00.1: [8086:1521] type 00 class 0x020000
pci 0000:04:00.1: reg 0x10: [mem 0xfb100000-0xfb11ffff]
pci 0000:04:00.1: reg 0x18: [io  0xe000-0xe01f]
pci 0000:04:00.1: reg 0x1c: [mem 0xfb140000-0xfb143fff]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1c.0: bridge has subordinate 04 but max busn 05
pci 0000:05:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:05:00.0: enabling Extended Tags
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05-06]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:06: extended config space not accessible
pci 0000:06:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:06:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff]
pci 0000:06:00.0: reg 0x18: [io  0xd000-0xd07f]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0:   bridge window [io  0xd000-0xdfff]
pci 0000:05:00.0:   bridge window [mem 0xfa000000-0xfb0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
iommu: Default domain type: Translated 
pci 0000:06:00.0: vgaarb: setting as boot VGA device
pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:06:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7986f000-0x7bffffff]
e820: reserve RAM buffer [mem 0x79b38000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bdc9000-0x7bffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0580-0x059f] has been reserved
system 00:01: [io  0x0600-0x061f] has been reserved
system 00:01: [io  0x0880-0x0883] has been reserved
system 00:01: [io  0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0a00-0x0a0f] has been reserved
system 00:02: [io  0x0a10-0x0a1f] has been reserved
system 00:02: [io  0x0a20-0x0a2f] has been reserved
system 00:02: [io  0x0a30-0x0a3f] has been reserved
system 00:02: [io  0x0a40-0x0a4f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci_bus 0000:00: max bus depth: 2 pci_try_num: 3
pci 0000:00:1c.0: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:02.2: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:04:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref]
pci 0000:04:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref]
pci 0000:04:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref]
pci 0000:04:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0:   bridge window [io  0xd000-0xdfff]
pci 0000:05:00.0:   bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:1c.4: PCI bridge to [bus 05-06]
pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.4:   bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:01: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:04: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfb0fffff]
pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x710 took 21512 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x710 took 23388 usecs
pci 0000:06:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 31208K
DMAR: dmar0: Using Queued invalidation
pci 0000:ff:0b.0: Adding to iommu group 0
pci 0000:ff:0b.1: Adding to iommu group 0
pci 0000:ff:0b.2: Adding to iommu group 0
pci 0000:ff:0b.3: Adding to iommu group 0
pci 0000:ff:0c.0: Adding to iommu group 1
pci 0000:ff:0c.1: Adding to iommu group 1
pci 0000:ff:0c.2: Adding to iommu group 1
pci 0000:ff:0c.3: Adding to iommu group 1
pci 0000:ff:0c.4: Adding to iommu group 1
pci 0000:ff:0c.5: Adding to iommu group 1
pci 0000:ff:0f.0: Adding to iommu group 2
pci 0000:ff:0f.4: Adding to iommu group 2
pci 0000:ff:0f.5: Adding to iommu group 2
pci 0000:ff:0f.6: Adding to iommu group 2
pci 0000:ff:10.0: Adding to iommu group 3
pci 0000:ff:10.1: Adding to iommu group 3
pci 0000:ff:10.5: Adding to iommu group 3
pci 0000:ff:10.6: Adding to iommu group 3
pci 0000:ff:10.7: Adding to iommu group 3
pci 0000:ff:12.0: Adding to iommu group 4
pci 0000:ff:12.1: Adding to iommu group 4
pci 0000:ff:13.0: Adding to iommu group 5
pci 0000:ff:13.1: Adding to iommu group 5
pci 0000:ff:13.2: Adding to iommu group 5
pci 0000:ff:13.3: Adding to iommu group 5
pci 0000:ff:13.4: Adding to iommu group 5
pci 0000:ff:13.5: Adding to iommu group 5
pci 0000:ff:13.6: Adding to iommu group 5
pci 0000:ff:13.7: Adding to iommu group 5
pci 0000:ff:14.0: Adding to iommu group 6
pci 0000:ff:14.1: Adding to iommu group 6
pci 0000:ff:14.2: Adding to iommu group 6
pci 0000:ff:14.3: Adding to iommu group 6
pci 0000:ff:14.4: Adding to iommu group 6
pci 0000:ff:14.5: Adding to iommu group 6
pci 0000:ff:14.6: Adding to iommu group 6
pci 0000:ff:14.7: Adding to iommu group 6
pci 0000:ff:15.0: Adding to iommu group 7
pci 0000:ff:15.1: Adding to iommu group 7
pci 0000:ff:15.2: Adding to iommu group 7
pci 0000:ff:15.3: Adding to iommu group 7
pci 0000:ff:1e.0: Adding to iommu group 8
pci 0000:ff:1e.1: Adding to iommu group 8
pci 0000:ff:1e.2: Adding to iommu group 8
pci 0000:ff:1e.3: Adding to iommu group 8
pci 0000:ff:1e.4: Adding to iommu group 8
pci 0000:ff:1f.0: Adding to iommu group 9
pci 0000:ff:1f.2: Adding to iommu group 9
pci 0000:00:00.0: Adding to iommu group 10
pci 0000:00:02.0: Adding to iommu group 11
pci 0000:00:02.2: Adding to iommu group 12
pci 0000:00:03.0: Adding to iommu group 13
pci 0000:00:05.0: Adding to iommu group 14
pci 0000:00:05.1: Adding to iommu group 15
pci 0000:00:05.2: Adding to iommu group 16
pci 0000:00:16.0: Adding to iommu group 17
pci 0000:00:16.1: Adding to iommu group 17
pci 0000:00:1a.0: Adding to iommu group 18
pci 0000:00:1c.0: Adding to iommu group 19
pci 0000:00:1c.4: Adding to iommu group 20
pci 0000:00:1d.0: Adding to iommu group 21
pci 0000:00:1f.0: Adding to iommu group 22
pci 0000:00:1f.2: Adding to iommu group 22
pci 0000:00:1f.3: Adding to iommu group 22
pci 0000:00:1f.6: Adding to iommu group 22
pci 0000:01:00.0: Adding to iommu group 23
pci 0000:01:00.1: Adding to iommu group 23
pci 0000:01:00.2: Adding to iommu group 23
pci 0000:01:00.3: Adding to iommu group 23
pci 0000:04:00.0: Adding to iommu group 24
pci 0000:04:00.1: Adding to iommu group 25
pci 0000:05:00.0: Adding to iommu group 26
pci 0000:06:00.0: Adding to iommu group 26
DMAR: Intel(R) Virtualization Technology for Directed I/O
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x000000007586f000-0x000000007986f000] (64MB)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x2120
ACPI: \_SB_.SCK0.CP00: Found 1 idle states
ACPI: \_SB_.SCK0.CP01: Found 1 idle states
ACPI: \_SB_.SCK0.CP02: Found 1 idle states
ACPI: \_SB_.SCK0.CP03: Found 1 idle states
ACPI: \_SB_.SCK0.CP04: Found 1 idle states
ACPI: \_SB_.SCK0.CP05: Found 1 idle states
ACPI: \_SB_.SCK0.CP06: Found 1 idle states
ACPI: \_SB_.SCK0.CP07: Found 1 idle states
ACPI: \_SB_.SCK0.CP08: Found 1 idle states
ACPI: \_SB_.SCK0.CP09: Found 1 idle states
ACPI: \_SB_.SCK0.CP0A: Found 1 idle states
ACPI: \_SB_.SCK0.CP0B: Found 1 idle states
intel_idle: ACPI _CST not found or not usable
intel_idle: v0.5.1 model 0x56
intel_idle: Local APIC timer is reliable in all C-states
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: registered as rtc0
rtc_cmos 00:00: setting system clock to 2023-01-27T15:42:29 UTC (1674834149)
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: sig=0x50663, pf=0x10, revision=0x7000012
microcode: Microcode Update Driver: v2.2.
resctrl: L3 allocation detected
resctrl: L3DATA allocation detected
resctrl: L3CODE allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1080543279, 5481637)->(1136194374, -50169458)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
zswap: loaded using pool lzo/zbud
Key type .fscrypt registered
Key type fscrypt-provisioning registered
pstore: Using crash dump compression: deflate
AppArmor: AppArmor sha1 policy hashing enabled
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2664K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 636K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
  with arguments:
    /init
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=/vmlinuz-5.10.0-20-amd64
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x000000000000042F (\GPE0) (20200925/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000052C-0x000000000000052D (\GPIV) (20200925/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
PTP clock support registered
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
dca service started, version 1.12.1
i2c i2c-0: 1/4 memory slots populated (from DMI)
SCSI subsystem initialized
igb: Intel(R) Gigabit Ethernet Network Driver
igb: Copyright (c) 2007-2014 Intel Corporation.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb304000
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst 
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.10.0-20-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb303000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.0-20-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
igb 0000:04:00.0: added PHC on eth0
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:86:7d:f4
igb 0000:04:00.0: eth0: PBA No: 010000-000
igb 0000:04:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb302000 port 0xfb302100 irq 37
ata2: SATA max UDMA/133 abar m2048@0xfb302000 port 0xfb302180 irq 37
ata3: SATA max UDMA/133 abar m2048@0xfb302000 port 0xfb302200 irq 37
ata4: SATA max UDMA/133 abar m2048@0xfb302000 port 0xfb302280 irq 37
ata5: SATA max UDMA/133 abar m2048@0xfb302000 port 0xfb302300 irq 37
ata6: SATA max UDMA/133 abar m2048@0xfb302000 port 0xfb302380 irq 37
igb 0000:04:00.1: added PHC on eth1
igb 0000:04:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:86:7d:f5
igb 0000:04:00.1: eth1: PBA No: 010000-000
igb 0000:04:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-10: ST1000NX0423, TN04, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST1000NX0423     TN04 PQ: 0 ANSI: 5
igb 0000:04:00.1 eno2: renamed from eth1
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
igb 0000:04:00.0 eno1: renamed from eth0
usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
 sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2199.997 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb6300e510, max_idle_ns: 440795316804 ns
clocksource: Switched to clocksource tsc
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
usb 2-1.4: new high-speed USB device number 3 using ehci-pci
usb 2-1.4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00
usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1.4:1.0: USB hub found
hub 2-1.4:1.0: 4 ports detected
usb 2-1.4.1: new low-speed USB device number 4 using ehci-pci
PM: Image not found (code -22)
usb 2-1.4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00
usb 2-1.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID 0557:2419 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.0/0003:0557:2419.0001/input/input0
hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:1d.0-1.4.1/input0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1:1.1/0003:0557:2419.0002/input/input1
hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:1d.0-1.4.1/input1
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Queued start job for default target Graphical Interface.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Paths.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Finished Availability of block devices.
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: modprobe@configfs.service: Succeeded.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
fuse: init (API version 7.32)
systemd[1]: modprobe@fuse.service: Succeeded.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: modprobe@drm.service: Succeeded.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: Started Journal Service.
systemd-journald[308]: Received client request to flush runtime journal.
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
IPMI message handler: version 39.2
ipmi device interface
ioatdma: Intel(R) QuickData Technology Driver 5.00
ipmi_si: IPMI System Interface driver
ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
ipmi_si IPI0001:00: ipmi_platform: [io  0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
iTCO_vendor_support: vendor-support=0
sd 0:0:0:0: Attached scsi generic sg0 type 0
input: PC Speaker as /devices/platform/pcspkr/input/input4
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460)
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x092d, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
cryptd: max_cpu_qlen set to 1000
ast 0000:06:00.0: [drm] P2A bridge disabled, using default configuration
ast 0000:06:00.0: [drm] AST 2400 detected
ast 0000:06:00.0: [drm] Analog VGA only
ast 0000:06:00.0: [drm] dram MCLK=396 Mhz type=1 bus_width=16
[TTM] Zone  kernel: Available graphics memory: 8143992 KiB
[TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] Initialized ast 0.1.0 20120228 for 0000:06:00.0 on minor 0
fbcon: astdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
ast 0000:06:00.0: [drm] fb0: astdrmfb frame buffer device
ipmi_ssif: IPMI SSIF Interface driver
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Adding 999420k swap on /dev/mapper/103--vg-swap_1.  Priority:-2 extents:1 across:999420k FS
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6c
EDAC sbridge: Seeking for: PCI ID 8086:6f6d
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC MC0: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT)
EDAC sbridge:  Ver: 1.1.2 
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain dram
audit: type=1400 audit(1674834156.351:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=517 comm="apparmor_parser"
audit: type=1400 audit(1674834156.359:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1674834156.363:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=516 comm="apparmor_parser"
audit: type=1400 audit(1674834156.391:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/unbound" pid=514 comm="apparmor_parser"
audit: type=1400 audit(1674834156.407:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=515 comm="apparmor_parser"
audit: type=1400 audit(1674834156.407:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=515 comm="apparmor_parser"
audit: type=1400 audit(1674834156.407:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=515 comm="apparmor_parser"
igb 0000:04:00.0 eno1: igb: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
sctp: Hash tables configured (bind 256/256)
perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3131 > 3128), lowering kernel.perf_event_max_sample_rate to 63750
perf: interrupt took too long (4062 > 3913), lowering kernel.perf_event_max_sample_rate to 49000
perf: interrupt took too long (5087 > 5077), lowering kernel.perf_event_max_sample_rate to 39250
perf: interrupt took too long (6441 > 6358), lowering kernel.perf_event_max_sample_rate to 31000

Return To Intel Xeon D-1531 System Information